Harley S-188N Medical N95 Mask Specification
N95 TC Number TC-84A-9381
Approval Date 11/29/2021
Manufaturer Guangzhou Harley Commodity Company Limited
Harley S-188N Surgical Filtering Facepiece bulk supply Features
Harley S-188N Medical N95 masks for coronavirus protection fda approved Application
Use Instruction for Harley S-108 Surgical Mask
1. Failure to follow all instructions and limitations can seriously reduce the effectiveness of this respirator and could lead to illness, injury or death.
2. A properly selected respirator is essential. Before occupational use, the wearer must be trained by the employer in the correct use of the respirator in accordance with applicable safety and health standards.
3. This product does not supply oxygen. Use only in adequately ventilated areas containing sufficient oxygen to support life.
4. Discard the respirator and replace it with a new one if:
A. excessive clogging of the respirator causes breathing difficulty
B. the respirator becomes damaged.
5. Leave the contaminated area if dizziness, irritation or other distress occurs.
6. Keep respirators in the display box away from direct sunlight until use.
7. Before occupational use of this respirator, a written respiratory protection program must be implemented meeting all the local government requirements. In the United States, employers must
comply with OSHA 29 CFR 1910.134 which includes medical evaluation, training, and fit testing.
8. Before wearing the respirator users must check whether there is a crack or a spot around the welding spot. if yes, this respirator must be discarded at once and can not be used again.
9. The product is not made with natural rubber latex.
10. S – Special or Critical User Instructions: This respirator has been approved as a NIOSH N95 filtering facepiece respirator, for use in healthcare settings, as a Surgical N95 Respirator conforming to recognized standards for biocompatibility, flammability, and fluid resistance.
Harley S-188N Surgical N95 Mask Individually Wrapped Cautions and Limitations:
A- Not for use in atmospheres containing less than 19.5 percent oxygen.
B – Not for use in atmospheres immediately dangerous to life or health.
C – Do not exceed maximum use concentrations established by regulatory standards.
J – Failure to properly use and maintain this product could result in injury or death.
M – All approved respirators shall be selected, fitted, used, and maintained in accordance with MSHA, OSHA, and other applicable regulations.
N – Never substitute, modify, add, or omit parts. Use only exact replacement parts in the configuration as specified by the manufacturer.
0 – Refer to User’s Instructions, and/or maintenance manuals for information on the use and maintenance of these respirators.
S – Special or Critical User Instruction and/or specific use limitations apply. Refer to User Instructions before donning.