Shigematsu DD02-N95-2K Disposable N95 Masks Wholesale specification
N95 TC Number TC-84A-7646
Approval Date 4/22/2016
Manufacturer Shigematsu Works Co., Ltd.
Shigematsu DD02-N95-2K Respirator Mask Features
SHIGEMATSU Respirator Mask DD02-N95-2K is made by Shigematsu Works Co., Ltd.
Head strap length is adjustable which can suit any head size.
No metal was used. Suitable for those environments where metal is not allowed.
NIOSH Certified disposable N95 mask that offers at least 95% filtration efficiency.
A continuous loop design can allow to hang the mask around the neck when not in use.
Soft and breathable material to wear.
Shigematsu DD02-N95-2K Disposable N95 Mask Application
Welding, meltdown, melting works, Pesticide spraying (Wettable powder dry powder), Sand/rock dust (Drilling, grinding), Sander work, Grinder work
Shigematsu DD02-N95-2K N95 Mask Proper fitting
In order to achieve the original performance of the respirator, the respirator must have best fit. The
user is required to be fit tested according to OSHA 29 CFR 1910.134 either qualitatively or
quantitatively prior to use. Conduct a fit check following this procedure every time you put on the
1. Wear the respirator in the same manner as you actually conduct during work.
2. Cover the respirator with two hands and exhale.
If it is not possible to cover the respirator with both hands, use a polyethylene sheet to cover the
surface of the respirator, holding it down with both hands and exhale.
3. Check that no air leaks through respirator-to-face seal when you exhale. If you feel air leakage,
adjust the position of respirator and/or tention of straps until the air leakage stops.